Flooring

Protect Vinyl Flooring from Moisture

One of the good things about the vinyl floor is that they are quite resistant to moisture and it will take a huge number of spills to cause any visible effect on it. When there is a constant presence of moisture underneath the floor which ends up corroding the adhesive and causing the edges to pull away, this is where there is a problem with the level.

It ends up causing the edges of the floor to pull away, and it also leads to discoloration as well as stain rings. The sources of the moisture on the floor are quite numerous, and some of them are usually not taken into consideration by contractors. There is the need for the adequate checking and fixing of any source through which water might infiltrate the vinyl and also thoroughly preparing the concrete.

Vinyl flooring installation

It is critical that the floor installers check the level of moisture in the concrete during the facility. Once the moisture level is adequate, then the installation of the floor may proceed. If however, something changes such as a heavy rain after a long drought season, inadequate drainage, or improving landscaping, then there is a high possibility of the home being subjected to vapor emission.

In the process of installing vinyl flooring in an area with high moisture, the floor should be dried first; although this might take a long time ranging from days to weeks.

Moisture and Vinyl Adhesive

Go for plastic that comes with built-in mildewcide which won’t allow the growth of mold. Purchase an adhesive that comes with an already made sealant, and you should also ensure it is compatible with the floor.

In case your concrete subfloor is too moist, then you should consider some other flooring options such as tiles. A good practice is also the installation of new flooring over an old one, for instance, this will encapsulate old materials that contain asbestos and also add some extra level of moisture protection.

Sealing out Moisture

One of the most prevalent sources of moisture to a floor is the toilet; you should always ensure that all the adjacent fixtures to the part for vinyl floor installation are water tight; hence you should pay extra attention to the toilet.

Conduit water pipes are also where moisture comes in contact with the vinyl flooring, making use of high quality, flexible silicone sealant will help to keep the emission of vapor down.

Find out more informations here: http://www.allamericandoor-mn.com/the-real-deal-behind-home-construction-cost/